Usage of Lubricant In Maintenance Of Roll Forming Machine

Inside the daily preservation of roll forming machines, the use of lubricants is a very crucial element. a few additives are nicely used and can be used for many years. if some necessary renovation paintings is not achieved, they may put on out fast. in addition, the use of various lubricants in exclusive components is also precise about, if not used properly, it's going to not characteristic as a lubricant and motive damage. below, we in brief introduce the maintenance techniques and upkeep durations of a few typically used additives.

First, the transmission tools. in these locations, lubricating oil must be applied about once every 1/2 a month. typically, 18 # hyperbolic equipment oil is used in those locations.

2nd, the shaft give up bearing on the roller shaft, oil every 10 days or so.

Third, the reducer driven by way of the motor need to constantly check the amount of oil in it, and it should be kept at two-thirds. it wishes to be checked often to comprehend the time c language for refueling.

Fourth, lubrication of punching mechanism. the use of a movable guidepost of a hydraulic press or a hydraulic press calls for the lubricant to be applied more than one times a day, in addition to the mould. in locations wherein it's miles regularly active, it is also vital to apply oil more than one times an afternoon.

5th, cut off the module, inclusive of a blade, you want to refuel several instances an afternoon.

6th,the bearing and sliding mechanism of the de-coiler shall be lubricated once every half of a month.